Enjin Coin (ENJ) Tokenomics comment from Atlas Development CFO
Read Here
Enjin Gradient Hero
View Collection on
Claim Your Primythical Chest
Receive the world's most useful gaming item.
Get the Primythical Chest for free. Then, open it in 10+ games.
Claim for Free

Explore Enjin's evolution with Xentaya. Witness the community's impact on Web3.

The introduction of the dual-token system, EFI and ENJ, in 2021 marked a significant pivot for the Enjin community. The decision to build on the Polkadot blockchain was driven by the need for a fluid, high-volume, and cost-effective ecosystem. EFI was introduced to fuel the Efinity network, while ENJ aimed to secure the network through staking and governance, reinforcing the value of early adopters in the ecosystem.

A division between EFI and ENJ advocates further complicated matters. Nevertheless, the migration to Polkadot was not without cause, as the evolving needs of the Enjin ecosystem necessitated a shift to a blockchain solution that best suited these needs.

Amidst this transformative phase, acknowledging the community's sentiments is pivotal. The transition prompted frustration, perceived as sluggishness with "soon" becoming a symbolic refrain. The EFI and ENJ dichotomy further nuanced matters. However, the migration to Polkadot was strategic, driven by the thoughtful rationale which sought to accommodate the continuing growth of the Enjin ecosystem.

The sequence of events that followed these upgrades ignited speculation. Efinity's unanticipated downtime left the community pondering motivations. A subsequent announcement – forking Polkadot to birth the Enjin Blockchain – sparked contemplation.

Retrospectively, the move away from Polkadot aligns with Enjin's vision for an NFT-focused ecosystem. Technological evolution collided with this vision, potentially breeding frustration and prompting transformation. Delays within Polkadot's framework could have curtailed Enjin's aspirations, necessitating a distinct path.

The Birth of the Enjin Blockchain

The turning point arrived with the creation of the Enjin Blockchain, a move precipitated by technical challenges and the aspiration for a purpose-built ecosystem. The decision to fork Polkadot and develop a purpose-built blockchain for NFTs was a strategic move to overcome limitations and foster a seamless gaming experience. The transition should provide the Enjin community with the autonomy and flexibility required to fulfill its ambitious goals.

Role in the Web3 Landscape

As Enjin embarks on its journey with the new blockchain, its position in the web3 space presents intriguing possibilities. Enjin Blockchain admirably seeks to address the blockchain trilemma—balancing security, scalability, and speed— by narrowing its focus on an NFT-specific chain. Customisable chains, rapid transactions, and low costs, all secured by the Enjin Relaychain, have been strategically aligned to facilitate user onboarding.

Enjin's tech stack, which is designed to work seamlessly with Enjin Blockchain, holds significant promise for fostering adoption, with tools like Fuel Tanks and Beam at the forefront. Fuel Tanks enable seamless user interactions by subsidizing transaction costs, effectively eliminating entry barriers for newcomers. Beam, a QR code-based distribution system, streamlines engagement anddissemination, exemplifying Enjin's commitment to accessible and engaging blockchain experiences.

Additionally, Enjin Blockchain's emphasis on interoperability stands as a crucial differentiator. Thegoal to connect different blockchain ecosystems positions Enjin Blockchain as an NFT superhighway, bridging various chains and expanding the scope of digital asset ownership.

-
,
Join
Xentaya
in the Enjin
Community
Join over a million collectors, creators, and developers building up Enjin's Ecosystem.
Build with Enjin
Push Web3
forward,
like
Xentaya Creative
Work with Enjin to create initiatives that
excite and inspire
the public, and move
Web3
towards
mass adoption.
Build with Enjin
Build Games That Break Barriers
Join
Xentaya Creative
in leveraging Enjin's
tools,
and build a Web3
proof-of-concept
in just 2 hours.
Build with Enjin
Launch a Revolutionary Web3 App
Join
Xentaya Creative
in leveraging Enjin's
industry-leading tools,
and build a Web3
proof-of-concept
in just 2 hours.
Build with Enjin

Navigating the Regulatory Landscape

In a climate marked by increasing regulatory scrutiny, Enjin Blockchain’s approach to its launch underscores a commitment to compliance. The blatant overreach of the SEC has proven to be an issue. By forgoing an ICO and leveraging the existing base of 170,000 ENJ wallets, Enjin Blockchain will build towards building a robust and compliant ecosystem. This strategic move not only aligns with the expectations of cautious corporations but also enhances Enjin Blockchain's appeal within the regulatory framework.

The decision to rely on existing ENJ holders is an astute move that resonates strongly with the corporate world. Corporations, often cautious due to evolving regulatory standards, are more likely to engage with projects that have taken proactive steps to adhere to compliance requirements. In doing so, Enjin Blockchain positions itself as a responsible and forward-looking player within theregulatory framework, garnering trust and credibility among potential enterprise partners.

Enjin's Vision for the Future

As Enjin sets its sights on the horizon, it's important to recognize the potential of seemingly mundane use cases that hold transformative power. Ticketing and tokenization of traditional business processes, although less glamorous, have the potential to drive mass adoption and integrate blockchain into everyday operations.

The rollout of the new Enjin blockchain unveils a vision of connectedness and interoperability.Enjin's aspiration to become a major player in the NFT arena, rivaling even established platforms like OpenSea, underscores its commitment to innovation. The Enjin community, along with its diverse array of projects and initiatives, is well poised to redefine the landscape of web3 gaming.

A Call to Community and Enjin Collaboration

Enjin's journey has been marked by challenges, transformations, and a relentless pursuit of progress. With its newfound autonomy, Enjin has the canvas to paint a future where its blockchain solutions seamlessly integrate into the fabric of web3. However, success on this transformative journey hinges on collective efforts.

Partnerships, adoption, and community engagement form the bedrock of Enjin's next chapter. Through collaboration and a shared vision, Enjin can bridge the gap between blockchain and mainstream adoption. As a community member, my hope is that Enjin Blockchain's governance empowers stakeholders to propose and enact positive changes, ensuring that the ecosystem evolves in ways that benefit everyone involved.

To reach our desired destination, it's imperative that we forge significant partnerships andwitness a few trailblazing instances that propel widespread adoption. It's noteworthy to observe the triumphs of other blockchain networks in this arena, as they serve as valuable case studies for us to dissect, formulate a meticulous strategy, and execute it with precision.

The leaders of our project will wield substantial influence in steering the course of adoption. Envisioning a scenario where key individuals align themselves as adept implementation specialists seems plausible. Those who have previously accomplished this feat would serve as educators, imparting their knowledge to others. In a similar vein, advisors would assume the role of connectors, assembling the puzzle pieces by assimilating the visions and ideas of creators. This, in turn, would infuse a sense of confidence and guidance required to actualize our blockchain objectives.

My current perspective, mirroring the prevailing sentiment within the community, is directed towards addressing the tokenomics associated with our nascent blockchain. Specifically, ENJ is undergoing a transition from a fully circulating supply to an augmented one, accompanied by an element of inflation. The viability of these tokenomics hinges significantly on the level oftriumph achieved, thereby sustaining the engagement of our community encompassing stakeholders and node collators.

A remarkable opportunity lies within the domain of governance. It's not inconceivable to contemplate the implementation of a voting mechanism to adjust the inflation rate, undertake buyback initiatives, and strategically diminish the token supply over time. This empowerment offers us the capacity to propose constructive changes that resonate positively with our community, further reinforcing our collective aspirations.

In Conclusion

Enjin's journey has been one of resilience, evolution, and adaptability. The challenges faced along the way have only fuelled its determination to craft a blockchain ecosystem that fosters innovation and inclusivity. The introduction of the Enjin Blockchain marks a turning point, unlocking new avenues for growth, interoperability, and user engagement.

The success of Enjin's journey rests not only on groundbreaking technology but on a thriving community that passionately embraces the vision. The future holds promise and potential, and it is our collective responsibility to shape it into a reality where Enjin shines brightly as a beacon of innovation in the web3 landscape.

Femme Fantasy Trading
Discover Xentaya's body of work on NFT.io
View Collection

Stay in the loop

Be the first to know about ground breaking innovations in the Enjin Ecosystem.
Thank you! Your subscription has been received!
Something went wrong!

You’ll receive:

  • Exclusive opportunities to win high-utility NFTs.
  • Invitations to special events and beta testing.
  • Early access to new features and tools.
Browse Adopters
Enjin Wallet

Join 4 Million+ Hodlers

App StoreGoogle Play
By clicking “Accept All Cookies”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts. View our Privacy Policy for more information.